VTech KidiZoom Smartwatch DX3 Manuel D'utilisation page 30

note that close-range focus on or handling of a KidiZoom
DX3 as a game controller for a prolonged period of time may cause fatigue
or discomfort. We recommend that children take a 15-minute break for
every hour of play.
TROUBLESHOOTING
Check this section if you experience difficulty operating the KidiZoom
Smartwatch DX3.
Problem Correction
1. Slide the Master Power Switch Off for 30 seconds.
2. Slide the Master Power Switch On again and then
The watch
has stopped
working
3. If the watch doesn't work, recharge the battery and
1. Slide the Master Power Switch Off for 30 seconds.
Screen is
2. Slide the Master Power Switch On again and then
not working
correctly
1. Make sure the lighting conditions of the shooting
Image
2. Hold the watch still for taking photos.
taken is not
3. Check to see if the camera lens is clean. If you find
clear
1. Check the connections on the cable between the watch
Cannot
connect the
watch to a
2. Slide the Master Power Switch Off for 30 seconds.
computer
30
press the Home Button to turn the watch on. It should
now work properly.
repeat steps 1 and 2.
(Refer to the battery recharging section for details.)
press the Home Button to turn the watch on. The
screen should now function normally.
environment are good.
some dust or dirt on it, please see the steps to clean the
lens in the Care & Maintenance section.
and the computer and review the Connecting to a
Computer section of this guide.
Slide the Master Power Switch On and reconnect the
watch and computer.
® Smartwatch
®