System Setup; Setting The Video Convert Mode; The Video Conversion Function - Denon AVR-4806 Mode D'emploi

System Setup

After upgrading, part of the system setup menu changes.
SURROUND PARAMETER
ENTER
D H F G
SYSTEM SETUP <STATUS>
ENTER
SYSTEM SETUP
[ON SCREEN]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Setting the Video Convert Mode

Set whether or not to use the video conversion function.
1 D D H H
Press
Setup Menu", then press
2 D D H H
Press
ENTER
press
3 D D H H
Press to select the input source, then press
to select "ON" or "OFF".
ON:
When there are multiple input signals, the input signals are
detected and the input signal to be output from the video monitor
output terminal is selected automatically in the following order:
component video, S-Video, composite video.
OFF:
The convert function does not operate.
The video signal input from the video input terminal is only output
to the video monitor out terminal.
The S-Video signal input from the S-Video input terminal is only
output to the S-Video monitor out terminal.
The component input signal input from the component input
terminals is only output to the component monitor output
terminals.
D H F G
4 ENTER
Press
SURROUND
PARAMETER
2
to select "Video Setup" at the "System
ENTER
.
to select "Video Convert Mode", then
.
F F G G
.
3
2
ENGLISH
• Down-converting from the component video signal to the S-Video
and composite video signal is possible only when the resolution of a
component video signal is 480i / 576i.
• When a non-standard video signal from a game machine or some
other source is input, the video conversion function might not
operate. If this happens, please set the "Video Convert Mode" to
"OFF".
• When the video conversion function has been used, information
such as that of text broadcasts which has been added to the video
signal might not be output. If this happens, please set the "Video
Convert Mode" to "OFF".

The video conversion function

The AVR-4806 is equipped with a function for up and down converting
video signals.
Because of this, the AVR-4806's MONITOR OUT terminal can be
connected to the monitor (TV) with a set of cables offering a higher
quality connection, regardless of how the player and the AVR-4806's
video input terminals are connected.
Generally speaking, analog video connections using the component
video terminals offer the highest quality playback, followed by
connections using the S-Video terminals, then connections using the
regular video terminals (yellow).
The flow of the video signals.
(HDMI / DVI-D
terminals)
(Component video
terminals)
(S-Video terminal)
(Video terminal)
This unit's input terminals This unit's output terminals
: only MAIN ZONE 480i/576i
ENGLISH
(HDMI terminal)
(Component video
terminals)
(S-Video terminal)
(Video terminal)