Troubleshooting; Maintenance And Care - Kenwood CR-ST50DAB Notice D'emploi

Troubleshooting

Please check the following points in case of malfunctions:
No sound
 Plug in the power plug properly.
 Adjust the volume to the correct level.
 Make sure the desired source is selected.
The system does not respond at the touch of a button
 Unplug the AC adapter and reconnect it.
Problems with radio reception
 Reorient the antenna.
 Find a more suitable location.
 Other electrical appliances interfere with the reception.
 Location not suitable for receiving DAB + signals.

Maintenance and care

Cleaning the housing: Use a cloth lightly moistened with a mild detergent. Do not use detergents con-
taining alcohol, ammonia or scouring agents.
Cautions on condensation
Condensation (dew) may form inside the unit if there is a significant difference between the temperature of
the unit and the ambient temperature. If condensation occurs inside the unit, proper function is no longer
guaranteed. In this case, you have to wait a few hours; After the moisture has dried, the device can be
reused.
Special care should be taken in the following circumstances
When the unit is moved from one place to another at a much higher or lower temperature, or when the
humidity at the installation site increases, etc.
15