Before Start-Up; Connect; First Use - Kenwood CR-ST50DAB Notice D'emploi

Before start-up

Unpacking
Carefully unpack the device and make sure all accessories are present:
Operating instructions
Inserting Batteries (not included)
• Insert 4 R6 / AA / Mignon batteries into the radio, observing the
correct polarity (+ and -).
• The power supply via the batteries is switched off when the power is
supplied via the mains adapter.
• The batteries drain more quickly when the radio is used in a cold
environment.

Connect

• Carefully unpack the device and make sure all accessories are present:
• Connect the mains adapter to the radio and to the mains socket.
DAB + / FM telescopic antenne
1. Carefully unlock the antenna on the left side of the casing.
2. Turn the antenna upwards and pull out all the elements completely.
3. Align the antenna for the best reception.

First use

When the unit is switched on for the first time, an automatic DAB+ channel search is start-
ed. Please wait until this process is completed. For more information, please refer to the section
"Using the DAB+ Radios".
6
Mains adapter