Rds Functions; Menu Functions Fm - Kenwood CR-ST50DAB Notice D'emploi

Usage of Radio Data System (RDS)
RDS is a broadcast system in which FM stations transmit useful information along with the actual
broadcast signal. These can be extracted from the normal transmit signal and used for a number of
additional functions. If an RDS signal is received, after some time the station name will be displayed
instead of the frequency, and radio text will be displayed in the bottom line of the display (if support-
ed by the station).

RDS functions

The following information can be retrieved by repeatedly pressing the <INFO> key:
• PTY (Program Type) - If no PTY signal is sent from the station, "[No PTY]" will be displayed.
• Frequency - If no RDS signal is received, "[No Name]" appears.
• Time - If no time signal is sent by the transmitter, "00:00:00" will appear.
• Date - If no date signal is sent by the station, "01-01-2018" appears.
In the case of insufficient reception conditions, the reception of the signals may be interrupted or not
possible.
Storing stations in the preset memory
To store FM stations for easier retrieval, 20 memory slots are available. 4 memory presets can be
selected via direct selection buttons.
1. Storing on the direct selection buttons 1 - 4:
• Select a station to save
• Keep the corresponding number key pressed until "Preset X Stored" appears in the display.
• Stored stations can be called up by briefly pressing the direct selection buttons.
2. Assignment of the memory locations 5 - 20:
• Select a station to save
• Briefly press and hold the <*> button until "Preset Store" appears.
• Select a memory location with <TUNE/AUTO/ENTER/uII> .
• Press the knob to complete the storage. "Preset X Stored" appears in the display.
• Stored stations can be called up using the or buttons.

Menu functions FM

The <MENU> key opens a menu in which you can set various functions for FM. Use the
<TUNE/AUTO/ENTER/uII> knob to scroll through the menu. The following functions are adjustable:
• Scan setting: This allows you to set which stations are to be considered when searching for auto-
matic storage. Possible settings are "All stations" or "Strong stations only". Use the
<TUNE/AUTO/ENTER/uII> knob to select and confirm.
• SYSTEM: Settings for sleep timer, alarm clock, time, lighting, language and factory settings
13