HoMedics SOUNDSPA ENLIVEN Manuel D'instruction page 13

4. To adjust the light intensity, press and hold
the light bulb button until the desired light
intensity is reached. Holding the light bulb button
for 6 seconds or more will completely turn off
the light. Press the light bulb button again to
restore the light to full intensity.
5. When finished using the SoundSpa, you may turn
it off by holding the POWER button down for 3
seconds.
NOTE: If you wish to listen to sounds but do not want
light, press and hold the light bulb button until the
light turns off completely. If you wish to view the
lights but do not want sounds, repeatedly press the
volume down (-) button until the sound turns off.
NOTE: When unit is turned on it will always default
to the last sounds used, however, light will not be
on. You must press the light bulb button to turn on
the light feature for the first time. The light feature
will always default to the changing color option
when first turned on.
Using the Aux-in Port
1. Plug one end of the auxiliary cable (not included)
into the SoundSpa® and the other into the
headphone jack on your device.
2. Turn on the SoundSpa®
3. Go to your favorite music location on your device
and hit PLAY.
NOTE: You will have to use your device, not the
SoundSpa, to control the music and volume.
Using the Auto-Timer
1. When the power is on and you are listening to a
nature sound or viewing the lights, you may set a
timer so the unit will automatically turn off.
2. Toggle through the TIMER button (Fig 1) until
the corresponding LED illuminates next to the
time of your choice, 15, 30 or 60 minutes. The
unit will automatically shut off after the selected
time and the POWER LED (Fig 1) will turn off.
Once the timer is set if you choose to listen a
different sound, you may do so by pressing the
music note button (if the music feature isn't
already activated) and then pressing the silicone
top (Fig 1). If you choose to listen to the sounds
continuously again, toggle through the TIMER
button until the blue LED light is not illuminated
on any of the time choices.
NOTE: Do not select the TIMER button if you wish to
listen to the sounds continuously.
MAINTENANCE:
To Store
You may leave the unit on display, or you can store it
in its box in a cool, dry place.
To Clean
Wipe off dust with a damp cloth. NEVER use liquids
or abrasive cleaner to clean. Modifications not
authorised by the manufacturer may void users
authority to operate this device.
13 I GB