Skil 4490 Consignes De Fonctionnement/Sécurité page 12

SM 1619X01070 10-05 10/7/05 10:58 AM Page 12
FIG. 16
BLADE MUST BE IN
ALIGNMENT WITH NAIL
saw forward. To make a hole, cut from inside
the circle; To make wheels or discs, cut from
the outside.
Cutting Tip: Cut slowly so the blade will stay
straight in the cut. Place small wedges in the
cut as shown in Fig. 15, to keep the inner
circle from spreading when near the end of
the cut.
NAIL
-12-