SOUNDMASTER IR6500SW Manuel D'instructions page 28

FM Setup
➢ FM Area
Choose the Region according to your physical location to define the search range for the
unit.
➢ FM Preset Scan
You can always carry out a new scanning of FM channels by selecting this option. All
current presets and channels will be erased.
The radio at the lowest frequency of the scanned values will be highlighted. The preset
list will be saved unless a new preset scan is carried out.
➢ FM Radio Presets
You can adjust the preset ranking by Move down, Move up or Delete it. Highlight one of
the preset, then press the ► button, it will enter into the Edit menu.
Always press the ◄ button to return to the Preset list.
Playback Setup
This is to set the mode of playback under UPnP/DLNA compatible streaming: Repeat All,
Repeat Once or Shuffle.
Resume when Power on
This function is ON by default. The radio will resume to the last state of mode when the radio is
power on next time, e.g. if it was playing radio station before power off, it will resume playing the
last listened station when it is power on the next time.
Dimmer
You can set the backlight level for the display as you prefer. There are two settings: Mode and
Level
➢ Mode - Normal or Dim
Normal - the display will stay with the same level of brightness all the time without dim
down.
Dim - the display will dim down after 20 seconds if no operation is made on the radio.
➢ Level - Bright and Dim
Bright - This is to adjust the level of brightness in Normal mode.
Dim - This is to adjust the level of brightness in Dim mode.
➢ Dimmer in Standby
When the radio is in Standby, rotate the "TUNE/SELECT/VOLUME" knob to adjust the
backlight level at your preference which you feel comfortable especially during night time.
EQ (Equalizer)
Various music genres can be set.
IR6500SW / English Instruction Manual
11