One for All URC-1031 Mode D'emploi page 4

Direct Code Set Up
Setting up the UNIVERS L
Direct Code Set Up.
Please study first the code list (page 57 - 58) and note all
codes corresponding your air-conditioner brand (for
FAN SPEED
example codes 369, 371, 142, 143, 144, 168, 167, 171, 309 and 250
for the brand TCL).
DEV 1
In case that you your brand is not listed in the code list use
the" uto search method"
FAN SPEED
DEV 2
FAN SPEED
DEV 1
1.
DEV 3
DEV 1
DEV 2
DEV 2
2.
SET
DEV 3
DEV 3
SET
3.
SET
4.
FAN SPEED
MODE
FAN SPEED
DEV 1
AUTO SWING
DEV 1
DEV 2
If your air-conditioner doesn`t switch Off/On try the next code
SWING
DEV 2
corresponding to your brand (e.g. 371 for TCL).
DEV 3
PS MODE
DEV 3
5.
SET
TIME
SET
4
Select one of device keys (e.g. DEV 1).
Press and hold `SET` key for 3 seconds
and`SETUP` will blink twice on the display
and then "PRE-CODE` will be displayed.
Press `SET' to confirm.
Point the UNIVERS L
towards your air-conditioner and use the
"arrow keys" to select the first code (from
FAN SPEED
the code list) corresponding to your brand
(e.g. 369 for TCL). Every selected code will
automatically send out its POWER function.
DEV 1
DEV 2
DEV 3
s soon as the air-conditioner switches Off/On
press `SET' to save the selected code and
'OK' will be displayed.
SET
IRCON REMOTE using the
IRCON REMOTE
WWW ONEFORALL COM