PowerSmith PLM14021H Manuel De L'opérateur page 10

ASSEMBLY AND ADJUSTMENTS
INSTALLING THE GRASS BAG (FOR REAR BAGGING OPERATION) (FIG 3)
NOTE:
When using the grass bag, do not install the mulching insert.
•
lift the rear chute cover.
•
lift the grass bag by its handle and place under the rear chute cover so that the hooks on the grass bag are seated
on the cover rod.
•
Release the rear chute cover. When installed correctly, the hooks on the grass bag will extend through the openings
on the rear chute cover.
COVER ROD
HOOKS
FIG 3
INSTALLING THE MULCHING INSERT (FIG 4)
NOTE:
When using the grass bag, do not install the mulching insert.
•
lift the rear chute cover.
•
Grasp the mulching insert by its handle and insert it at a slight angle, as shown fIG 4.
•
Push the mulching plug securely into place.
•
Release the rear chute cover to make sure it rests firmly against the mulching insert.
INSTALLING THE SIDE DISCHARGE CHUTE (FIG 5)
NOTE:
When using the side discharge chute, the grass bag should be uninstalled.
•
lift the side discharge cover.
•
align the grooves on the side discharge chute with the rods underneath the discharge cover. See fIG 5.
•
lower the discharge chute to rest the opening on the mower deck.
•
Release the side discharge cover to secure the side discharge chute in place.
FIG 5
English
REAR CHUTE
COVER
HANDLE
GRASS BAG
RODS GROOVES
10
HANDLE
MULCHING INSERT
SIDE DISCHARGE COVER
SIDE DISCHARGE CHUTE
FIG 4