Using The Extension Cord - NRG ENERGY RWC-1 Manuel D'instructions

Table des Matières

Publicité

Operation
PLEASE NOTE: If the robot's movement is restricted by the length of the power or adapter
cable, you may use an ENERGY RWC-1 extension cord. Disconnect ends A and B, connect
them to the respective ends of the extension cord and screw them tight.

Using the Extension Cord

If ENERGY RWC-1's movement is restricted by the length of the power or
adapter cable, you may use an extension cord.
PLEASE NOTE: You may only use one (1) extension cord in combination with ENERGY RWC-1.
Loop the other end of the safety tether
(2) around the safety suction cup
(3) and tighten.
Before attaching the safety suction cup,
wipe the surface clean and dry.
If ENERGY RWC-1 is used to clean an
inside window surface, press the safety
suction cup firmly on the upper corner of
the inside window surface.
If ENERGY RWC-1 is used to clean an
outside window surface, attach the
safety suction cup firmly to the lower part
of the window for cleaning.
7
EN

Publicité

Table des Matières
loading

Table des Matières