NRG ENERGY RWC-1 Manuel D'instructions page 23

Operating and Safety Notes
• Initial battery setup: ENERGY RWC-1's emergency battery must be fully
charged before the device is used for the first time. The battery is charged
when the top indicator light of the robot turns blue.
• Do not use the device if it is not firmly attached to the window surface or if it
is visibly damaged.
• Keep the device away from water and other liquids to avoid any risk of
electric shock.
• Do not touch the power supply adapter or the device if your hands are wet.
• Do not pull on the power or adapter cable; this might damage the device.
• Keep the adapter cable away from hot surfaces.
• Do not use the device if the adapter cable or the socket is damaged.
• PLEASE NOTE: Only charge the battery using the adapter cable supplied
with the device.
• The remote control requires two AAA batteries (not included).
• Remove the batteries if you do not use the remote control for an extended
period of time.
• The socket and the power plug are suitable for interior use only.
21
EN