Network - Scansonic R110 Guide D'instructions

Network

Network wizard
Select Region.
Use Up/Down or navigation buttons on the remote control to
highlight desired wireless network from the list or wired, if you want
to use wired ethernet (RJ45 cable), press Select to enter selection.
Enter the network key (password).
Use Up/Down or navigation buttons on the remote control to select
the characters.
Press Select to enter the highlighted character.
Highlight OK and press Select to save password.
The unit will not try to connect to the network.
If connecting fails, it will return to the previous screen.
The network is now connected.
Press Select to exit wizard.
The unit remembers the last four networks it has connected to, and automatically tries to connect
to whichever it can find.
For users experienced with networks settings, there are also other options for viewing and
manually altering network settings from Menu > System > Settings > Network.
R110
8