Dab Radio - Scansonic R110 Guide D'instructions

R110

DAB radio

DAB radio mode receives digital radio from the DAB band and shows
information about the station, the program and music.
To enter DAB mode, press Mode until the display shows DAB radio
or press DAB on the remote control.
Scan for DAB stations
First time the DAB mode is selected, it automatically scans for DAB
stations.
Use Up/Down to select a station from the list and press Select.
To make a new station scan: Menu > Scan and press Select.
Selecting stations
Use MENU > Station to show station and press Select to choose a station.
You can also use l>> or <<l to step to the next DAB station.
Manual tune
Used to scan manually.
Prune invalid
Removes unavailable stations.
DRC
Some DAB broadcasts uses DRC.
DRC is a dynamic range compression.
It increases the quieter parts and decreases the louder parts of the audio signal.
Use MENU > DRC and select DRC high, DRC low or DRC off.
Station order
Used to select sorting order for DAB stations.
Use MENU > Station order and select Alphanumeric, Ensemble or Valid.
11