Basic Operation; Checking Part Names And Functions; Remote Control; Inserting/Ejecting/Connecting Media - Pioneer AVH-270BT Mode D'emploi

Basic operation

Checking part names and
functions
7 8
1
2
3
4
5
6
1 RESET  Resetting the microprocessor on page 6
button
2 Volume (+/–) button
3 MUTE Press to switch the mute setting to on or off.
button
4 Press to switch the display between the top
button
menu screen and the current source screen.
5 DISP Press to turn the display on or off.
button
6 Performs manual seek tuning, fast forward,
TRK (
reverse and track search controls.
/ )
button
7
button
8 Disc-  Inserting and ejecting a disc on page 8
loading
slot
9 LCD screen

Remote control

The remote control CD-R33 is sold separately.
For details concerning operations, see the remote control
manual.
8
Inserting/ejecting/connecting
media
CAUTION
9
Do not insert anything other than a disc into the disc-loading
slot.
Inserting and ejecting a disc
Inserting a disc
 Insert a disc into the disc-loading slot.
Ejecting a disc
 Press button to eject a disc.
Plugging and unplugging a USB stor-
age device
p This product may not achieve optimum performance with
some USB storage devices.
p Connection via a USB hub is not possible.
p A USB cable is required for connection.
1 Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
1 USB cable
2 USB storage device
Check that no data is being accessed before pulling out the
USB storage device.

On first-time startup

1 Start the engine to boot up the system.
1
2
After a short pause, the splash screen comes on for a few
seconds.
The "Select Program Language" screen appears.
p From the second time on, the screen shown will differ
depending on the previous conditions.
2 Touch the language that you want to use on
screen.
3 Touch .
The top menu screen appears.