Remote Control; Operation; Automatic Massage Mode - iComfort ic7000 Manuel D'utilisation

9. OPERATION

Make sure the main power switch on the control box is on.
Important: The must be 1 cm between the back wall and the massage chair backrest in the upright
position. Also, please keep at least 50 cm of free space in front of the massage chair before activating it.
Press on the power switch
body scanning feature. Make sure your feet are well tucked in for your body to be measured correctly. If you
prefer the chair to massage higher or lower, you can use the up or down button
is 15 minutes.
Pressing again the power button
original upright position.

AUTOMATIC MASSAGE MODE

Press on the Auto
scroll down

REMOTE CONTROL

on the massage chair. When the power is on, the chair will activate the
button. The massage chair remote control shows 'Auto'
to the automatic massage mode of your choice: Recovery, Pain Relief, Stretch, Ease pain,
will deactivate the chair, stop the massage and have it return to its
. The default massage time
. Press and then