Bosch Turbobrush BGS5ZOOM2/02 Notice D'utilisation page 5

When the brush roller is rotating, do not leave the
turbo brush stationary on the carpet without moving
(Carpet pile damage).
Wool velour carpets, especially those with a loose
pile, should only be cleaned with the turbo brush at
widely spaced time intervals.
!
Please note
When the turbo brush is running, do not allow it to
enter the immediate vicinity of long hair, scarves,
ties or similar catchable objects.
The appliance may be used
by children over the age of 8
years and by persons with
reduced physical, sensory or
mental capacity or by
persons with a lack of
experience or knowledge if
they are supervised or have
been instructed on the safe
use of the appliance and the
have understood the
potential dangers of using
the appliance.
Children must never play
with the appliance.
Cleaning and user
maintenance must never be
carried out by children
without supervision.
Disposal information
Packaging
The packaging is designed to protect the turbo brush
from being damaged during transportation.
It is made from environmentally friendly materials
and is therefore recyclable.
Dispose of packaging that is no longer required at an
appropriate recycling point.
Old appliance
Old appliances still contain many valuable materials.
Therefore, when your turbo brush has reached the
end of its service life, please take it to your retailer
or recycling centre for recycling. For current disposal
methods, please enquire at a retailer or your local
council.
Appliance description
1 Tool connecting piece with accessory connection*
2 Tool connecting piece without accessory
connection*
3 Regulator for adjusting the turbo brush to the
particular texture of the carpet*
4 Brush roller release button
5 Viewing window with turbine*
6 Brush roller guide rod
7 Brush roller
Initial use
1*
Figure
a)Tool without accessory connection:
Connect the turbo brush to the suction pipe.
To release the connection, turn the tube slightly and
pull it out of the turbo brush connecting piece.
b)Tool with accessory connection:
Push the telescopic tube into the turbo brush
connecting piece until it locks in place.
To release the connection, press the locking collar
and pull out the telescopic tube.
Brush vacuuming
!
Please note
Only brush vacuum using full suction power, i.e.
maximum power setting on the vacuum cleaner.
2*
Figure
In order to achieve the optimum cleaning effect for
different types of floor coverings, the suction regulator
should be adjusted accordingly, depending on the type
of carpet.
=> long pile/closely woven carpets
=> short pile/loosely woven carpets or hard
floors
In the viewing window at the side, you can tell from the
speed at which the turbine is turning how fast the brush
roller is rotating.
If the brush is vacuuming too firmly or is turning too
slowly, the suction regulator should be turned further
towards the
symbol.
3
Figure
Only brush carpet fringes in the direction of the arrow.
Maintenance
Always switch off the vacuum cleaner and unplug the
power cable before carrying out maintenance work.
Remove the turbo brush from the suction/telescopic
tube
4
Figure
Release the brush roller using the unlocking knob and
pull it sideways out of the turbo brush.
*dependent on model
3