ENGLISH
isolation from the mains in case of category
III overvoltage conditions, in accordance
with wiring rules.
Use
The hood has been designed to be installed
and used either as a "Exhausted model", or
as a "Recirculation model".
Exhausted model (see symbol
installation booklet)
Cooking steam is sucked and channelled
outside the house through a discharge duct
(not supplied), fitted to the hood steam
outlet.
Ensure that the discharge duct is correctly
fitted to the air outlet, unit using an
appropriate connection system.
Important: If already installed, remove the
charcoal filter/s.
Recirculation model (see symbol
installation booklet)
The air is filtered through one or more the
charcoal filters, and then resent into room.
Important: Ensure appropriate air
circulation around the hood.
Important: If the hood is supplied without
charcoal filters, these must be ordered and
in
fitted before the hood can be used.
The hood should be installed away from
particularly dirty areas, windows, doors and
heat sources.
The hood is sold with all necessary
components for installation on most types of
walls or ceilings. However, ask a qualified
technician to check that the items supplied
are suitable for the type of wall/ceiling.
Keep this booklet for future consultation.
6
in