Sandr Garden TL 40 Mode D'emploi page 19

CUTTER CONTROL CABLE ADJUSTMENT
(Fig.1 part.B)
The adjustment and control operation
must be done by an authorised after-
sales centre.
Bad adjustment could prove haz-
ardous!
REDUCTION UNIT (Fig.10)
Periodically check the level of the oil in the reduction
unit by means of cap 1. Top up as necessary.
Completely replace the oil in the sump every 50
work hours, draining off the used oil through the
drain cap (2). Fill up with 125 cm
cap (1).
The used oil must be disposed of ac-
cording to the laws applicable in the
country where the TILLER is
used.
UNDER NO CIRCUMSTANCES
MUST IT BE DISPERSED IN THE
ENVIRONMENT.
CLEANING TRANSPORT AND STORAGE
# In the event of the machine not being used for
over 2 months, empty the fuel tank.
# Do not clean with aggressive liquids.
# Keep the machine in a dry and safe place that is
not accessible to children.
# Before transporting, empty the fuel tank.
TILLER OPERATING MANUAL
3 SAE 40 oil through
TILLER TECHNICAL DATA
Mass
(without fuel and oil)
Cutting width
Maximun cutter rotation speed
Guaranteed sound power level
2000/14 CE (LwA)
Vibrations on handle
EN 1033-1
Power:
BRIGGS & STRATTON - CLASSIC 35
TECUMSEH - VANTAGE 35
HONDA - GVC 135
note ____________________________________
___________________________________
___________________________________
__________________________________
__________________________________
_________________________________
__________________________________
_____________________________________________
___________________________________
___________________________________
__________________________________
__________________________________
_________________________________
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
__________________________________
__________________________________
_________________________________
__________________________________
GB
29 Kg
40 cm
125 1/min
96 dB(A)
18 m/s 2
1,9 Kw
1,9 Kw
2,9 Kw
19/
013