Inserting/Replacing The Batteries; Cleaning And Maintenance - EuroLite LED MCL 420 Mode D'emploi

The FIX-button permits the stopping of the color changer at a desired color. To continue with the color
changer, press the FIX-button again.
The SPEED+/- button changes the speed of the color changer.
By pressing the WHITE-button the disk glows with white color. To end this function, press the MODE-button.
The IR Remote Control funtions with 2 AAA Batteries. Please note the following instructions.

Inserting/Replacing the batteries

Open the battery cover on the bottom and remove it.
If replacing the batteries, remove the old batteries from the battery compartment. Only replace complete
battery-sets.
Leaky or damaged batteries might cause cauterisation when in contact with the skin; therefore, use suitable
protective gloves.
Only replace by the same type or similar types recommended by the manufacturer.
Remove empty batteries in accordance with the instructions of the manufacturer.
Insert the batteries and make sure that the poles are correct.
Replace the battery cover and close it.
If the device will not be used for a longer period of time, remove the batteries in order to avoid battery
leakage.
In order to have a long battery life, you should only use alcaline batteries.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
Danger of explosion when battery is replaced improperly.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Caution!
16/30 51931000_V_1_0.DOC