Fitting The Projector Plate To The Projector - Epson ELPMB25 Guide De L'utilisateur

Ceiling surface
The ceiling plate can be horizontally rotated at ±5 degrees. Adjust the direction of the
projector using four bolts secured loosely. After adjusting the direction, tighten the hexagon
nuts securely.

Fitting the Projector Plate to the Projector

Warning
vTighten all screws securely.
After securing the screws, retighten them and make sure that they are not loose.
vUse the supplied safety wires to prevent the projector from falling. sp.28
vApplying a screw-locking adhesive, lubricant, oil or other substance to the
points at which the projector is fixed to the ceiling mount can make the case
crack and the projector fall, leading to damage or injury. Do not use any sort
of adhesive, lubricant, or oil when installing or adjusting the ceiling mount.
Female type anchors
Concrete
Hanger bolts
Flat washers
Spring washers
Hexagon nut
The center of rotation
when adjusting the direction
Hexagon nut
At least 3 threads
23