Important - Bestway POWER STEEL PLATINUM Série Manuel Du Propriétaire

3
H
I
4
J
5
6
For pool with connection valve
A
H
H
J
2.5 cm - 5 cm
1 in - 2 in
B
Assembly of the Frame pool can be
completed without tools.

IMPORTANT:

Bestway Inflatables will not be responsible
for damage caused to the pool due to mishandling or failure to follow
these instructions.
1. Lay out all parts and check that you have the correct quantities as
listed in the components list. If you are missing any parts do not
assemble the pool and contact Bestway Customers Service.
2. Spread out the pool and make sure the pool is right side up; let it sit
exposed to direct sunlight for 1 hour or more so that the pool is more
flexible during set up.
3. Place the pool near an adequate drainage system to deal with
overflow water and ensure the pool's inlet A and outlet B are
correctly positioned to allow your filter pump to connect to a power
source.
NOTE:
Do not use extension power cords to power your
pump.
ATTENTION:
can damage the pool.
Filling Pool with Water
ATTENTION:
Do not leave pool unattended while filling with
water
1. Fill pool until water capacity is 90%, DO NOT OVERFILL as this
could cause the pool to collapse. In times of heavy rainfall you may
need to empty some of the water to ensure the level is correct.
2. When filling the pool is completed, check that the water is not
collecting on any side to ensure the pool is level.
IMPORTANT:
ground by digging out. Never attempt to move the pool with water in
it, serious personal injury or damage to the pool may result.
WARNING:
Your pool may contain a great deal of
pressure. If your pool has any bulge or uneven side then the pool is
not level, the sides may burst and the water may discharge
suddenly causing serious personal injury and/or damage to property.
3. Check pool for any leaks at valves or seams, check ground cloth for
any evident water loss. Do not add chemicals until this has been
done.
NOTE:
In the event of a leak, patch your pool using the
underwater adhesive repair patch included provided. Refer to the
FAQ's for further information.
0% 30%
Proper Water Level
NOTE:
Drawings for illustration purposes only. May not reflect
actual product. Not to scale.
Pool Maintenance
If you do not adhere to the maintenance guidelines below, your health
might be at risk, especially that of your children.
IMPORTANT:
water chemicals the PVC can be damaged and become discolor.
The following table lists the sequence of the tests that should be
carried out for the ideal values and possible actions. Regularly check
the pH value and chlorine concentration weekly and adjust to the ideal
values.
7
Do not drag the pool on the ground, this
If pool is not level, drain water and re-level
70%
0°
If you don't respect the ideal values of the
90%