Dutch originals DO-SV-BTSB04-S Manuel D'utilisation page 9

Connections
Power connection
Before connecting the power adapter, make sure you have completed all other
connections.
• Prior to use, check that the mains voltage is the same as the mains voltage stated
on the device.
• Plug the power adapter
• Plug the power plug of the power adapter
• The device is now in standby mode. The standby LED indicator
Making a wireless BT connection
You will need to pair your BT enabled audio player with the device when you use it
for the first time.
• Turn the device ON by pressing the power [ON/OFF] button
control.
• Press the [INPUT] button
device's remote control to select the BT mode. The BT LED indicator light
flash blue quickly, indicating it is in pairing mode.
• Keep the device and your BT enabled audio player within 1 M (3 ft) of each other
during the pairing process.
• Make your BT enabled audio player search for compatible BT devices and select
"DO-SV-BTSB4" from the list of found devices.
• A tone will sound to indicate successful pairing. The BT LED indicator light
stop flashing and will turn blue, indicating that your device is connected.
• If you want to connect another BT enabled audio player to the device, you must
disconnect the active paired connection from the active BT enabled audio player.
Go to your device's BT settings, select "DO-SV-BTSB4", and select "disconnect" or
"unpair". You can also switch OFF the BT function on the BT enabled audio player.
When the device has been unpaired and/or does not have an active paired BT
connection, repeat the pairing process with the (new) BT enabled audio player you
want to connect to the device.
• If you want to play and/or pause music on your connected BT audio player, open
your media player and press play/pause.
• To control your music, use the play, track & volume buttons on your connected BT
audio player or use the "control buttons" on the control panel of the device or remote
control.
• If a paired BT audio player is within range, it will automatically connect to the
device.
Please note:
If there are no paired BT audio players in range when the device is turned ON, it will
automatically go into BT pairing mode.
into an electrical outlet.
C
on the device or press the [INPUT] button
3
into the power socket of the device
C
will light up red.
5
on the remote
1
on the
2
will
5
will
5
EN 07
.
3