Dutch originals DO-SV-BTSB04-S Manuel D'utilisation page 11

device through a single HDMI connection. To use the ARC function, please make
sure your TV is equipped with HDMI-CEC and ARC.
When correctly set up, you can use your TV remote control to adjust the volume of
the connected device.
Connect the HDMI cable (not included) from the device's HDMI port
(ARC) port on your TV (minimum HDMI 1.4).
Then press the [INPUT] button
the remote control until the LED indicator
Please note!
• Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must
be set to ON, on your TV.
• The setting method for HDMI-CEC and ARC may differ depending on your TV. For
details about the ARC function, please refer to the manual of your TV.
• Only HDMI 1.4 cables can support the ARC function!
Optical mode
The optical port allows you to send audio from your connected audio player (TV) to
your device via an optical connection.
Connect an optical cable (not included) to a device that has optical output (e.g. TV,
game console, TV Box, Blu-ray/DVD player, etc.) and the other end to the OPT input
of the device
.
4
Then press the [INPUT] button
the remote control until the LED indicator
Control the sound level with the device's remote control.
Please note!
If there is no sound output, make sure the audio setting on the input source (e.g. TV,
game console, TV Box, Blu-ray/DVD player, etc.) is changed to "PCM" with optical
and coaxial output.
Power ON/OFF – Standby
Press the [ON/OFF] button
The LED indicator
Press the [ON/OFF] button
standby mode. The LED Indicator
Disconnect the power adapter from the mains supply if you want to switch the device
OFF completely.
Please note:
If the device is not in use (no input), it will automatically go into standby mode
after approx.20 minutes.
on the device or press the [INPUT] button
3
on the device or press the [INPUT] button
3
on the device's remote control to switch it ON.
1
of the last used source mode will light up.
5
on the device's remote control to switch the device to
1
5
flashes red & blue.
5
lights up purple.
5
will light up red.
to the HDMI
5
on
2
on
2
EN 09