Functional Test; Maintenance; Intervals - Weinmann ULM CASE I Mode D'emploi

7 Functional Test

8 Maintenance

8.1 Intervals

12 EN Functional Test
Carry out a functional test of the case after each use (or
at least every two years if the case is not used). If you
discover an error during the test, you are not permitted
to use the emergency case again until the error has been
resolved.
Follow these instructions for a functional test:
1. Make sure the inserts, cover, ampoule holders, case
corners and the handle are not damaged.
2. Check that the case locks are easy to open and close.
3. Make sure the case hinges and cover can be moved
easily and are correctly secured.
Replace defective parts.
The emergency cases are maintenance-free. Observe
the intervals for regular functional tests (see Section "7
Functional Test" on page 12).
We recommend allowing the manufacturer's
( WEINMANN Emergency) expert personnel to carry out
maintenance and repairs.