Operation; Space Dividers; Tube Holders; Ampoule Holders - Weinmann ULM CASE I Mode D'emploi

5 Operation

5.1 Space Dividers

5.2 Tube Holders

5.3 Ampoule Holders

The interior of the case bottom can be separated as desi-
red with the space dividers (5, 12 and 14). See Illustration
1, Device Overview, for an example.
Observe the following when using the dividers:
• proper positioning as illustrated
• right-angle placement in the opposing grooves
• correct clicking-in of the snap elements
To remove a divider, press both circular snap elements
together (as shown) and lift the divider.
The manufacturer has supplied tube holders 15 a) and
15 b) as sets with the fastening elements. You can fasten
the tube holders to any divider in the case bottom (see
illustration).
The ampoule holders (19 and 20), delivered as a set with
the fastening elements or as replacement parts, can be
attached (as shown) to the desired spot on the inside of
the cover (2)).
Important!
Make sure that when you close the cover, no am­
poules are crushed by a divider or other equipment.
Operation EN 9