Safety Rules; General - Promax MC-377+ Manuel D'utilisation

INSTRUCTION MANUAL MC-377+.

2. SAFETY RULES

2.1 General

* Use this equipment connected only to devices or systems with their negative of
measurement connected to ground potential.
* This is a class I equipment, for safety reasons plug it to a supply line with the
corresponding ground terminal.
This equipment can be used in Overvoltage Category II installations and Pollution
*
Degree 2 environments.
* When using some of the following accessories use only the specified ones to
ensure safety
Rechargeable battery
Mains cord
* Observe all specified ratings both of supply and measurement.
* Remember that voltages higher than 60 V DC or 30 V AC rms are dangerous.
* Use this instrument under the specified environmental conditions.
* The user is only authorised to carry out the following maintenance operations
Replace the battery.
Replace the mains fuse of the specified type and value.
On the Maintenance paragraph the proper instructions are given.
Any other change on the equipment should be carried out by qualified
personnel.
* The negative of measurement is at ground potential.
* Do not obstruct the ventilation system
* Follow the cleaning instructions described in the Maintenance paragraph
May 2001
Page 7