GRIMM PM 60.60 Manuel D'instructions page 22

5.4.7 REPLACING THE YELLOW INDICATOR LIGHT AND
THE LIGHT SWITCH
After carrying out the operations described in 5.1 above, to replace the
yellow indicator light and the light switch proceed as follows:
- remove the control panel fixing screws
- disconnect the faston connectors for both the yellow indicator and
the light switch (item 4-13-14 Plate E)
- replace the yellow indicator light
- replace the light switch
- perform the above operations in reverse order to reassemble
5.4.8 REPLACING THE HEATING ELEMENTS
After carrying out the operations described in 5.1 above, to replace the
heating elements proceed as follows:
- Unfasten the fixing screws.
- Disconnect the heating element supply wires.
- Remove the heating elements (item 10 plate E).
- Perform the above operations in reverse order to reassemble.
6 LIST OF SPARE PARTS
Index of plates
Plate A PM-PD 60.60 - Baking chamber assembly;
Plate B PM-PD 72.72-65.105-105.105-105.65 – Baking chamber
assembly;
Plate C iD 60.60 M/D - Baking chamber assembly;
Plate D iD 72.72-65.105-105.105-105.65 M/D – Baking chamber
assembly;
Plate E L60.60-72.72-65.105-105.105-105.65-LU60.60 - Leavening
compartment assembly;
Plate F PM 60.60 - Wiring diagram;
Plate G PD 60.60 - Wiring diagram;
Plate H PM 72.72-65.105-105.105-105.65 - Wiring diagram;
Plate I PD 72.72-65.105-105.105-105.65 - Wiring diagram;
Plate L iD/M 60.60 - Wiring diagram;
Plate M iD/D 60.60 - Wiring diagram;
Plate N iD/M 72.72-65.105-105.105-105.65 - Wiring diagram;
Plate O iD/D 72.72-65.105-105.105-105.65 - Wiring diagram;
Plate P L60.60-72.72-65.105-105.105-105.65-LU60.60 - Wiring
diagram;
INSTRUCTIONS FOR ORDERING SPARE PARTS
Orders for spare parts must contain the following information:
- Appliance type
- Appliance serial number
- Name of part
- Number required
UK/8