Table des Matières
Publicité
PRO.BOSE.COM
MB210-WR
System Performance
Frequency Response (±3 dB)
Frequency Range (–10 dB)
Nominal Coverage Pattern (H × V)
Recommended High-pass Filter
Crossover
Power Handling, long-term continuous
Power Handling, peak
Sensitivity (SPL / 1 W @ 1 m)
4
Calculated Maximum SPL @ 1 m
Calculated Maximum SPL @ 1 m, peak
Transducers
Low Frequency
Nominal Impedance
Physical
Enclosure Material
Finish
Grille
Environmental
Connectors
Suspension/Mounting
Dimensions (H × W × D) – millimeters
Dimensions (H × W × D) – inches
Net Weight (loudspeaker only)
Net Weight (with U-bracket)
Shipping Weight
Accessories
Footnotes
1.
Frequency response and range measured on-axis in anechoic environment with recommended bandpass and EQ.
2.
Bose extended-lifecycle test using pink noise filtered to meet IEC268-5, 6-dB crest factor, 500-hour duration.
3.
AES standard 2-hour duration with IEC system noise.
4.
Sensitivity measured in anechoic environment with recommended bandpass and EQ.
5.
Maximum SPL calculated using sensitivity and power ratings, exclusive of power compression.
Installation Guide • MB210/MB210-WR
45 to 180 Hz
1
37 to 270 Hz
Omni-directional below 200 Hz
40 Hz with 24-dB/octave filter
—
Bose Extended Lifecycle Test
Free Field
90 dB
117 dB
5
123 dB
2 × Bose 10-inch, high-excursion woofers
8 Ώ
Exterior-grade birch plywood
Two-part polyurethane coating, black or white
Powder-coated perforated stainless steel, acoustic foam, stainless steel mesh
Rated for direct-exposure outdoor installations (IEC 60529: IP55)
1 × barrier strip (accepts 10 to 18 wire gauge)
3 × M8 threaded inserts for U-bracket (per side)
291 × 685 × 517 with U-bracket
11.5 × 27.0 × 20.4 with U-bracket
19.4 kg (42.8 lb)
23.0 kg (50.6 lb)
27.7 kg (61.1 lb)
Included stainless-steel U-bracket
2
500 W
2000 W
Wall/Ceiling
96 dB
123 dB
129 dB
Technical Specifications
AES Transducer Test
3
625 W
2500 W
Free Field
Wall/Ceiling
90 dB
96 dB
118 dB
124 dB
124 dB
130 dB
English • 19
Publicité
Table des Matières
