Comelit NVR Série Mode D'emploi page 30

3） DHCP:Click "√" in front of "DHCP", it will acquire a valid IP automatically according to the
router DHCP
4）Device Port: Input relevant device port number (5050 default)
5）Subnet Mask: Input relevant IP subnet mask number
6）Default Gateway: Input relevant default gateway
7) DNS1 and DNS2: Administer main machine to realize DVR register to the servers
automatically
8）MAC：Display present MAC address
9）HTTP Port:Input relevant port number (80 default）
10）Multicast: Edit relevant multicast address
Advanced setting
Set advanced configuration parameters on the "Advance" interface, as shown in the
below picture:
1) Enable PPPOE function to achieve NVR dialing
2) Click "√" in front of " Enable UPnP"，and setup HTTP port and TCP port it can match
successfully, notice the port number can not conflict with other devices.
30