Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Channel
From
3
0
0
4
10
8.
Cleaning and Maintenance
•
All screws should be tightened and free of corrosion.
•
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections...
•
Mechanically moving parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
•
Disconnect the device from the mains prior to maintenance activities.
•
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
•
There are no user-serviceable parts, apart from the fuse.
•
Contact your dealer for spare parts if necessary.
Replacing the Fuse
Only replace the fuse by a fuse of the same type and rating.
1. Before replacing the fuse, unplug the mains lead.
2. Wedge the fuse holder out of its housing with a flat-head screwdriver.
3. Remove the damaged fuse from its holder and replace with the exact same type of fuse.
4. Insert the fuse holder back in its place and reconnect power.
9.
Technical Specifications
power supply
power consumption
LEDs
DMX channels
projecting distance
beam angle
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 01 – 16/10/2012
VDPL300CD
To
Description
255
Speed slow to fast
9
Strobe
255
Strobe slow to fast
100 ~ 240 VAC - 50/60 Hz
40 W
320 high power 5 mm LEDs (R:80, G:80, B:80, W:40, A:40)
1 or 4 channels
± 20 m
45°
457 x 433 x 286 mm
7 kg
8
©Velleman nv
Publicité
Table des Matières
