Samsung NE63 837 S Serie Manuel D'utilisation page 49

To control the oven remotely
1. Press Smart Control appears in the display. The oven can now be controlled
remotely with a connected remote device.
2. Select the oven icon on the SmartThings app to open the Oven Control app.
When the app is connected to the oven, you can perform the following
functions through the application:
Oven remote control using the SmartThings app
•
Oven/ Cooktop Monitoring •
Oven Remote Control •
•
My Cooking •
Error Check •
•
Temp. Probe
• If is not shown in the display, you are still able to monitor the oven and
cooktop status and turn the oven off.
NOTE
See the SmartThings app manual for detailed information.
Check the status of the oven.
Monitor the on/off status of each cooktop
burner.
Set or adjust oven settings remotely.
Turn the oven off remotely.
Once cooking starts, change the set cooking
time and temperature remotely.
Automatically recognize errors.
Monitor the current temperature and reset
the probe setting.
WI-FI On/Off
If you set the WI-FI mode to Off, mobile devices cannot connect to the range.
1. Tap and hold for 3 sec.
2. Select Wi-Fi mode using the dial knob.
3. Turn the dial knob to select On/Off and push to save the changes.
NOTE
Pressing Smart Control will delete
•
remote functions from operating.
• When oven cooking is finished or cancelled,
• For safety reasons, you must specify the cooking time to enable remote
control.
• The oven continues operating even if the Wi-Fi connection is lost.
• Smart Control will not work properly if the Wi-Fi Connection is unstable.
• See the SmartThings app manual for detailed information.
from the display and prevent most of the
is removed from the display.
English 49