Brother P-touch 2420PC Guide De Référence Rapide page 16

6 If "Replace with new Brother PT-2420PC" or
"Add Brother PT-2420PC" was selected:
With Windows ® 98/98SE/Me/2000 :
A dialogue box appears, instructing you to
connect the PT-2420PC to the computer.
Connect the PT-2420PC to the computer
using the enclosed USB interface cable as
described on page 5, and then turn on the
PT-2420PC. A dialogue box appears,
showing that the printer driver has been
installed.
Select "Yes, restart immediately.", and then
click the Finish button to restart the
computer.
With Windows ® XP:
In the first Found New Hardware Wizard
dialog box that appears, select "Install the
software automatically (Recommended)",
and then click the Next button.
If a dialog box warning appears indicating
that the software has not passed Windows
Logo testing, simply continue with the
installation.
12
In the Found New Hardware Wizard dialog
box that appears, indicating that installation
of the PT-2420PC and the Found New
Hardware Wizard are finished, click the
Finish button.
In the dialog box that appears, indicating that
installation is finished, select "Yes, restart
immediately.", and then click the Finish
button. The computer is restarted.
Remove the CD-ROM from the computer.