Use Your Soundbar - Magnat SB 180 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
Note
During play, do not plug out the line in cable.
On your TV, it is recommended to set the volume
in the range of 60% maximum volume to avoid
distortion of the audio output.
If your TV supports OPTICAL OUT feature, connect
your Soundbar to the TV through a digital optical
cable (not supplied).
POWER
AUX
Connect audio from other devices
Play audio from other devices through your
Soundbar speakers.
Note
During play, do not plug out the audio cable.
Connect audio through a digital optical cable
(not supplied)
POWER
AUX
Connect audio through analog audio cables (not
supplied)
DVD PLAYER
POWER
AUX
OPTICAL IN
INPUT
LINE
OPTICAL
PAIR
OPTICAL IN
INPUT
LINE
OPTICAL
PAIR
AUX IN
INPUT
LINE
OPTICAL
PAIR
19

USE YOUR SOUNDBAR

This section helps you use the Soundbar to play
audio from connected devices.
Before you start
• Make the necessary connections described in
the user manual.
• Switch the Soundbar to the correct source for
other devices.
Adjust the volume
1. Press +/- (Volume) to increase or decrease the
volume level.
• To mute the sound, press
• When mute is on, the POWER indicator on the
front panel of main unit blinks in red.
• When mute is off, the POWER indicator stops
blinking and the light is off.
• To restore the sound, press
VOL +/-.
2. To increase or decrease volume, press VOL +/-
on remote control.
POWER
AUX
LINE
0
• When pressing VOL+, the indicators on the
front panel light up from left to right.
• When pressing VOL-, the indicators on the front
panel light up form right to left.
• All indicators on the front panel blink twice
when the volume is set to either minimum or
maximum.
Note
The volume might be influenced by MP3 or
Bluethooth player.
on remote control.
again or press
INPUT
OPTICAL
PAIR
32

Publicité

Table des Matières
loading

Table des Matières