Cleaning Instructions; Front Panel - Panasonic CS-VZ9SKE Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16

Cleaning instructions

To ensure optimal performance of the unit, cleaning has
to be carried out at regular intervals. Dirty unit may cause
malfunction. Please consult authorised dealer.
• Switch off the power supply and unplug before cleaning.
• Do not touch the aluminium fin, sharp parts may cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household detergent.
• Do not use water hotter than 40°C.
Indoor unit
Wipe the unit gently with a soft, dry cloth.
Human activity sensor
Do not hit or violently press or poke it with a sharp object.
This can lead to damage and malfunction.
Outdoor unit
Clear debris that surround the unit.
Clear any blockage from drain pipe.

Front panel

• Raise and pull to remove the front panel.
• Use dry or soft cloth.
Remove the front panel
2
1
Raise
Close it securely
Arm
1 Insert at both sides
2 Close down
Air Purification Filter
• Do not wash/rinse the filter with water.
• Replace the filter every 2 years.
Part no.: CZ-SA33P
Pull out
Air Purification Filter
Indoor unit
Air Purification Filter
(inside the air filter)
Front panel
Display cover
Air filters
<How to open horizontal louvers>
Pressing ECONAVI button for 5 seconds, and display shows "OPEN
LOUVER", the louvers will be open.
To close them, press OFF button.
Air filters
Every 2 weeks
• Wash/rinse the filters gently with water to
avoid damage to the filter surface.
• Dry the filters thoroughly under shade, away from fire or
direct sunlight.
Remove air filter
Attach air filter
Rail (Orange)
Ditch
For seasonal inspection after extended non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select COOL/HEAT operation.
After 15 minutes of operation, it is normal to have the
following temperature difference between air inlet and air
outlet vents:
COOL: ≥ 8°C
HEAT: ≥ 14°C
For extended non-use
• Activate HEAT mode for 2~3 hours to remove moisture left
in the internal parts thoroughly to prevent mould growth.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
<How to open the front panel>
Pull the open/close part, then open
with hands.
<How to open the display cover>
Put your fingers on the tabs on the
display cover, then open it downward.
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cs-vz12skeCu-vz9skeCu-vz12ske

Table des Matières