Daewoo DMF-4002S Mode D'emploi page 6

 Fill the Water Tank with clean water.
 Close the plastic cover by tightening it in a clockwise direction. Note that there is a white
silicone ring which must not be loosened when filling the Water Tank with water.
 Place the Water Tank back onto the Humidifier Power Base.
 Plug the Mist Fan into the mains electrical supply. A "beep" sound will be heard indicating
that the Mist Fan is connected to the power.
 The "POWER" indicator light on the Main Control Panel will illuminate.
 Now the Mist Fan can be switched on either on its Main Control Panel or by the Remote
Control.
 Press the ON button to switch the Mist Fan on.
 By default, the Mist Fan will be switched ON in
 Low Speed Setting,
 Fixed Direction and
 Normal Wind mode setting

After switching on the Mist Fan you can select different Speed Settings or the Wind Mode
that you prefer.
 The table below shows which switches perform which speed and wind functions:
Main
Remote
Control
Control
Panel
OFF
ON/SPEED
OSC
MIST
TIMER
Remote Control Only
MODE
Indicator Lights
Standby mode. The fan is ready to
POWER
use but has not started operating yet.
Press Once -
LOW
Low Wind speed setting
Press Twice -
MED
Medium Wind speed setting
Press Three Times -
HIGH
High Wind speed setting
Press Once -
The Fan head will oscillate
OSC When pressing again -
The Fan head will be fixed in one
direction only
Press Once -
The Fan will generate mist
MIST
When pressing again -
The Fan will stop generating mist
0,5H Every press represents a time increase of
1H 30 minutes. Max. time on the timer is 7,5
2H hours. When pressing again while it is set to
4H 7,5 hours all time settings will be canceled.
For selecting different Wind outputs:
NOR
- Normal Wind Mode
NAT
- Natural Wind Mode
SLEEP
- Sleep Wind Mode
Features