Assembling Your Fan - Daewoo DMF-4002S Mode D'emploi

ASSEMBLING YOUR FAN

 Unpack all the parts of the fan and remove the packaging.
 Insert the 2 Standing Bars into the Base. Note that each Standing Bar has 2 holes on one
side. This side with the holes must be installed into the side of the base with two holes. Then
fix four screw provided.(M4x10mm)
Attach Standing Bars to the
Base. Tighten the screws after
fixing Standing Bars to the Base.
 Place the weight under the Base then assemble with 4 screws provided.
 Ensure that the weight is correctly assembled as depicted in diagrams below.
 Assemble the main unit onto the 2 Standing Bars. Note that there are 2 screws on the Main
Unit which the installer must loosen before installing. After installing, these 2 screws can be
tightened.
 Place the Humidifier Power Base onto the Base.
INCORRECT CORRECT
(M4x20mm)