Recipes
BlueRhino.com/recipes
Cleaning and Care
W CAUTION:
1. All cleaning and maintenance should be done when grill is cool
and with the fuel supply disconnected.
2. Do NOT clean any grill part in a self-cleaning oven. The extreme
heat will damage the finish.
3. Do NOT enlarge valve orifices or burner ports when cleaning the
valves or burners.
W CAUTION: Unplug rotisserie motor from the outlet when not in use and
before cleaning. Allow to cool before putting on or taking off parts.
Notices
1.
This grill should be thoroughly cleaned and inspected on a regular basis.
2.
Abrasive cleaners will damage this product.
3.
Never use oven cleaner to clean any part of grill.
Before Each Use:
1.
Keep the grill area clean and free from any
combustible materials, gasoline, and other
flammable vapors and liquids.
2.
Do NOT obstruct the flow of the combustion of LP
gas and the ventilation of air.
3.
Keep the ventilation opening(s) of the LP gas tank
area free and clear from debris.
4.
Visually check the burner flames to make sure
your grill is working properly (Figure 16).
5.
See sections below for proper cleaning
instructions.
6.
Check for obstructions of airflow to the burners.
Spiders, insects and webs can clog the burner/
venturi tube. A clogged burner tube can lead to
a fire.
Cleaning Surfaces
1.
Wipe surfaces clean with mild dishwashing
detergent or baking soda mixed with water.
2.
For stubborn surfaces, use a citrus-based
degreaser and a nylon scrubbing brush.
3.
Rinse clean with water.
4.
Allow to air dry.
Cleaning Main Burners
1.
Turn LP gas tank valve to "CLOSED."
2.
Turn all control knobs clockwise to the " OFF"
position.
Note: A "poof" sound is normal as the last of the
gas is burned.
3.
Disconnect LP gas tank per "Disconnecting LP
Gas Tank" section.
4.
Remove cooking grids and heat plates.
5.
Remove burners by removing the fasteners, which secure the burners to the grill bottom.
6.
Lift burners up and away from gas valve orifice.
7.
Disconnect wire from spark electrode.
8.
Clean venturi of each burner with small bottle brush or compressed air.
9.
Remove all food residue and dirt on burner surfaces.
10. Clean any clogged ports with a stiff wire (such as an opened paper clip).
11. Inspect burners for any damage (cracks or holes). If damage is found, replace with new
burner(s) from manufacturer.
12. Reinstall burners, checking to insure that gas valve orifice is correctly positioned inside
each burner venturi. Also, check position of spark electrode.
13. Replace heat plate(s) and cooking grid(s).
14. Connect LP gas tank per "Installing LP Gas Tank" section.
15. Perform leak test per "Checking for Leaks" section.
Cleaning Side Burner
1.
Turn LP gas tank valve to "CLOSED."
2.
Turn all control knobs clockwise to the " OFF" position.
Note: A "poof" sound is normal as the last of the gas is burned.
3.
Disconnect LP gas tank per "Disconnecting LP Gas Tank" section.
4.
Remove side burner grid.
5.
Remove burner by removing the screws that secure the burner to the side shelf.
6.
Lift burner up and away from gas valve orifice.
7.
Clean venturi of burner with small bottle brush or compressed air.
8.
Remove all food residue and dirt on burner surface.
9.
Clean any clogged ports with a stiff wire (such as an opened paper clip).
Need help? 1.800.762.1142
Do not return to place of purchase.
Figure 16
Burner Flame Conditions
Use this chart to see if your burners
need to be cleaned.
1-2 in. /
25.4 - 50.8 mm
Normal: Soft blue flames with yellow
tips between 1 in. - 2 in. height.
Needs cleaning: Noisy with hard
blue flames.
Has to be replaced: Wavy with
yellow flames.
Replacement Parts
parts.BlueRhino.com /
1.800.762.1142
10. Inspect burner for any damage (cracks or holes). If damage is found, replace with new
burner from manufacturer.
11. Reinstall burner, check to insure that gas valve orifice is correctly positioned inside burner/
venturi tube, also check position of the spark electrode.
12. Replace cooking grid(s).
13. Connect LP gas tank per "Installing LP Gas Tank" section.
14. Perform leak test per "Checking for Leaks" section.
Before Storing
1.
Turn LP gas tank valve to "CLOSED."
2.
Turn all control knobs clockwise to the " OFF" position.
Note: A "poof" sound is normal as the last of the gas is burned.
3.
Disconnect LP gas tank per "Disconnecting LP Gas Tank" section.
4.
Clean all surfaces.
5.
Lightly coat the burner(s) and cooking grid(s) with cooking oil to prevent excess rusting.
6.
If storing the grill indoors, disconnect the LP tank per "Disconnect LP Gas Tank" section.
7.
Place the protective cap cover on the LP tank and store the tank outdoors in a well-
ventilated area out of direct sunlight.
8.
If storing the grill outdoors, cover the grill with a grill cover for protection from the weather.
Product Registration
For faster warranty service, register your product immediately at BlueRhino.com/warranty or by
calling 1.800.762.1142.
Replacement Parts
Replacement parts can be found at parts.BlueRhino.com or by calling 1.800.762.1142.
Limited Warranty
Blue Rhino Global Sourcing, Inc. ("Blue Rhino") warrants to the original retail purchaser of this
product, and to no other person, that if this product is assembled, maintained, and operated
in accordance with the printed instructions accompanying it, then for a period of five (5) years
for the burners and one (1) year for all remaining parts from the date of purchase, all parts in
such product shall be free from defects in material and workmanship. Blue Rhino may require
reasonable proof of your date of purchase. Therefore, you should retain your sales slip or
invoice. This Limited Warranty shall be limited to the repair or replacement of parts, which prove
defective under normal use and service and which Blue Rhino shall determine in its reasonable
discretion upon examination to be defective. Before returning any parts, you should contact
Blue Rhino's Customer Service Department using the contact information listed below. If Blue
Rhino confirms, after examination, a defect covered by this Limited Warranty in any returned
part, and if Blue Rhino approves the claim, Blue Rhino will replace such defective part without
charge. If you return defective parts, transportation charges must be prepaid by you. Blue Rhino
will return replacement parts to the original retail purchaser, freight or postage prepaid.
This Limited Warranty does not cover any failures or operating difficulties due to accident,
abuse, misuse, alteration, misapplication, improper installation or improper maintenance or
service by you or any third party, or failure to perform normal and routine maintenance on
the product as set out in this owner's manual. In addition, the Limited Warranty does not cover
damage to the finish, such as scratches, dents, discoloration, rust or other weather damage,
after purchase.
This Limited Warranty is in lieu of all other express warranties. Blue Rhino disclaims all
warranties for products that are purchased from sellers other than authorized retailers or
distributors, including the warranty of merchantability or the warranty of fitness for a particular
purpose. BLUE RHINO ALSO DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING
WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. BLUE RHINO SHALL HAVE NO LIABILITY TO PURCHASER OR ANY THIRD
PARTY FOR ANY SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
Blue Rhino further disclaims any implied or express warranty of, and assumes no responsibility
for, defects in workmanship caused by third parties.
This Limited Warranty gives the purchaser specific legal rights; a purchaser may have other
rights depending upon where he or she lives. Some jurisdictions do not allow the exclusion or
limitation of special, incidental or consequential damages, or limitations on how long a warranty
lasts, so the above exclusion and limitations may not apply to everyone.
Blue Rhino does not authorize any person or company to assume for it any other obligation
or liability in connection with the sale, installation, use, removal, return, or replacement of its
equipment, and no such representations are binding on Blue Rhino.
Blue Rhino Global Sourcing, Inc.
Winston-Salem, North Carolina 27105 USA
1.800.762.1142
15