Charging Your Goal Zero Yeti; Charging From Solar; Charging From The Wall - GOAL ZERO YETI 200X Mode D'emploi

Charging Your Goal Zero Yeti

CHARGE ME NOW: Before using or storing, plug your Goal Zero Yeti into the wall until it is
fully charged. Keep your Goal Zero Yeti plugged in when not in use. For more tips and tricks
on keeping your battery healthy, see the BATTERY 101 section.
When charging your Goal Zero Yeti you will notice a lightning bolt icon that flashes blue
in the display. This indicates that it is charging. Once your Goal Zero Yeti is fully charged,
the battery display indicator will read 100.

Charging from Solar

IMPORTANT NOTE: When solar recharging your Goal Zero Yeti Lithium, take
note of the voltages of the solar panels and do not exceed 22V. Individual solar
panels, or solar panels chained in series in excess of 22V cannot be used with
the Goal Zero Yeti Lithium and can cause serious damage to the unit. For help on
chaining solar panels, call our Customer Solutions Center at 888-794-6250.
The Goal Zero Yeti's charging port is located on the back of the Yeti and has a blue ring
around it. This 8mm port is designed to work with Goal Zero solar panels and is capable
of taking in 120W of solar.
1. Place your solar panel where it will get as much direct sunlight as possible.
2. Insert the blue-ringed plug from the panel into the input port on the back of the
Yeti. You will know the Yeti is charging when the lightning bolt icon is flashing blue on
the display. The Yeti is fully charged when the battery display indicator reads 100.
3. Some Goal Zero panels are chainable to provide more power to your Yeti and
reduce solar charge times. The input port is capable of taking in 120W of solar.
4

Charging from the Wall

Using the included AC Wall Charger, plug your Goal Zero Yeti into any wall outlet. You will
know the Goal Zero Yeti is charging when a lightning bolt icon flashes blue in the display.
The Goal Zero Yeti is fully charged when the battery display indicator reads 100. The
Goal Zero Yeti should recharge from the wall in about 5 hours.
1. The AC wall adapter comes in two pieces. Connect the two pieces by plugging the
cable into the box.
IMPORTANT NOTE: The Goal Zero Yeti Lithium can be charged from your car's 12V port
using a Goal Zero 12V Car Charging Cable.
5