G Operating instruction
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or
to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information
or important notes.
2. Package Contents
• „Roundly" radio-controlled alarm clock
• 1 AA battery
• These operating instructions
3. Safety Instructions
• The product is intended for private, non-commercial
use only.
• Protect the product from dirt, moisture and overheat-
ing, and only use it in a dry environment.
• Do not use the product in areas where the use of
electronic devices is not permitted.
• Do not place the product near interference fields, metal
frames, computers, TVs, etc. Electronic
devices and window frames can negatively affect the
product's functionality.
• Do not drop the product and do not expose it to any
major shocks.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
• Do not modify the product in any way. Doing so voids
the warranty.
• Keep the packaging material out of the reach of
children due to the risk of suffocation.
• Dispose of packaging material immediately according
to locally applicable regulations.
2
Warning – Batteries
• When inserting batteries, note the correct polarity
(+ and - markings) and insert the batteries
accordingly. Failure to do so could result in the
batteries leaking or exploding.
• Only use batteries (or rechargeable batteries) that
match the specified type.
• Before you insert the batteries, clean the battery
contacts and the polar contacts.
• Do not allow children to change batteries without
supervision.
• Do not mix old and new batteries or batteries of a
different type or make.
• Remove the batteries from products that are not
being used for an extended period (unless these
are being kept ready for an emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or allow
them to enter the environment. They can contain
toxic, environmentally harmful heavy metals.
• Immediately remove and dispose of dead batteries
from the product.
• Avoid storing, charging or using the device
in extreme temperatures and extremely low
atmospheric pressure (for example, at high
altitudes).
4. Getting Started
4.1 Inserting the battery
Remove the battery that was already inserted into the
clock, remove the protective film if necessary as well as
the contact interrupter and the re-insert the battery with
the correct polarity. The clock is ready for operation.