Manual de usuario
5.1.3. How to connect the Bluetooth transmitter and receiver (bathtub)
The transmitter must be disconnected. The bathtub must be connected to the electrical network.
Press the POWER button for 5 seconds until the LED flashes blue at very short intervals. This indicates
that the transmitter is looking for the receiver to make the connection.
As soon as the transmitter finds the receiver, the LED will flash blue at 6-second intervals.
5.1.4. Listening to music
· Once the transmitter and receiver have been connected, all that remains is to use a jack to connect a
music system with this type of output. The jack connection is the one usually used for headphones.
· To change songs, search for radio stations, adjust the volume, etc., the system must be connected to the
jack transmitter.
5.1.5.Technical specifications
Technical specifications of the transmitter.
· Bluetooth Protocol:............................2 A2DP
Frequency band:..............................2.4 GHz
· Range:..................................................10 m
· Autonomy:.........................................6 hours
· Weight:................................................16.5 g
The installation must have been carried out by a qualified technical service. Please follow the
suggestions included in both the Installation Manual and the Assembly Instructions, which are enclosed
with the bathtub.
The bathtub should be connected to 230 V and the household's installation must have a 30 mA differential
switch and an appropriate magnetothermal switch suited to the model.
The metal elements of the bathtub must be connected equipotentially in accordance with the regulations
applying in each country.
User's manual
Manuel de l´utilisateur
Technical specifications of the receiver.
· Bluetooth Protocol:.......................2 A2DP
· Amplifier:........................10 + 10 W Stereo
· Power supply:......................220 V - 50 Hz
· Speaker output:...........................8 Ohms
6. SAFETY
24 15