Maintenance And Service; Inspection And Maintenance Intervals - HEROSE 06001 Notice D'utilisation

7

Maintenance and service

7.1 Safety during cleaning

Take note of the specifications in the safety data sheet and the general occupational health and
saf ety rules if degreasers are used for process-related reasons for the cleaning of bearing parts,
f ittings and other precision parts.
7.2 Maintenance
The maintenance interv als must be defined by the user according to the operating conditions.
The recommendations f or functional checking of the overflow v alves are to be taken from section 7.2.1
"Inspection and maintenance intervals" in these operating instructions.
7.2.1

Inspection and maintenance intervals

Inspection
Inspection
Functional test
External inspection
Internal inspection
Strength test
Operating instructions
Recommended interv als
Interval

During start-up

annually

Ev ery 2 y ears

Ev ery 5 y ears

Ev ery 10 y ears
herose.com
Scope

Visual inspection

of the v alve for damage;

of the marking f or legibility;

f or absence of damage to
the seal

Leak-tightness

Threaded connection of the
v alv e seat;

If existent, actuation of the
lif ting.

If present, test of lifting including
v isual inspection.

Check of f unction and leak-
tightness including v isual check.

Replacement of all sealing
elements by the manufacturer
including f unctional, leak-
tightness and v isual check.

Replacement of all sealing
elements by the manufacturer
including f unctional, leak-
tightness, pressure test and
inspection.
21