Maintenance And Care; Spare Parts And Accessories; Disposal Information; Exemption From Liability - Flex CL 2000 18.0 Notice D'instruction D'origine

 The lamp head can be turned 360° in the
frame.
Mounting
 To mount the rechargeable LED work
light on the wall or on a stand, use the
wall mounting holes/threads (5/8").

Maintenance and care

Cleaning
WARNING!
Before performing any work, pull out
the mains plug. Do not use water or liquid
detergents.
 Remove dirt and dust from the housing
with a paint brush or dry cloth.
Repairs
Repairs may be carried out by an authorised
customer service centre only.

Spare parts and accessories

Exploded drawings and spare-part lists
can be found on our homepage:
www.flex-tools.com
12

Disposal information

WARNING!
Render redundant power tools unusable:
- mains operated power tool by removing
the power cord,
- battery operated power tool by removing
the battery.
EU countries only:
Do not dispose of electric power tools in
the household waste!
In accordance with the European Directive
2012/19/EU on Waste Electrical and
Electronic Equipment and its incorporation
into national law, used power tools must be
collected separately and recycled in an
environmentally friendly manner.
Raw material recovery instead of
waste disposal.
Device, accessories and packaging should be
recycled in an environmentally friendly
manner. Plastic parts are identified for
recycling according to material type.
WARNING!
Do not throw batteries into the household
waste, fire or water. Do not open used
batteries.
Accumulators/batteries should be collected,
recycled or disposed of in an environ-
mentally friendly manner.
EU countries only:
In accordance with Directive 2006/66/EC
defective or used batteries must be recycled
NOTE
Please ask your dealer about disposal
options!

Exemption from liability

The manufacturer and his representative
are not liable for any damage and lost profit
due to interruption in business caused
by the product or by an unusable product.
The manufacturer and his representative
are not liable for any damage which was
caused by improper use of the power tool
or by use of the power tool with products
from other manufacturers.
CL 2000 18.0