Symbols Used In This Manual; Symbols On The Power Tool; For Your Safety; Intended Use - Flex CL 2000 18.0 Notice D'instruction D'origine

Contents
Symbols used in this manual . . . . . . . . . . 8
Symbols on the power tool . . . . . . . . . . . . 8
For your safety . . . . . . . . . . . . . . . . . . . . . 8
Technical specifications . . . . . . . . . . . . . . 9
Overview . . . . . . . . . . . . . . . . . . . . . . . . 10
Instructions for use . . . . . . . . . . . . . . . . 11
Maintenance and care . . . . . . . . . . . . . . 12
Disposal information . . . . . . . . . . . . . . . 12
Exemption from liability . . . . . . . . . . . . . 12

Symbols used in this manual

WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Disposal information
(see page 12)!
Do not look into the light source!
Rough service luminaires
Dust-proof degree 5 and protection
against ingress of water 4
8

For your safety

WARNING!
Before using the power tool, please read
and follow:
these operating instructions,
Ó
the "General safety instructions" on the
Ó
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
the currently valid site rules and the
Ó
regulations for the prevention of
accidents.

Intended use

The rechargeable LED work light
CL 2000 18.0 is designed
Ó for commercial use in industry and trade,
Ó for targeted illumination of the workplace,
Ó for illuminating rooms.
The rechargeable LED work light
CL 2000 18.0 is not suitable
Ó for use as a headlight.
Safety instructions for rechargeable
LED work light
WARNING!
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injuries. Save all warnings
and instructions for future reference.
 Do not use the rechargeable LED work
light in a potentially explosive
environment.
 Do not point the light beam at people
or animals and do not look into the light
beam, even from far away.
 Do not cover the lamp head while
the rechargeable LED work light is in use.
The lamp head heats up when in use and
the accumulating heat may cause burns.
 Do not use the rechargeable LED work
light as a headlight.
 Before performing any work on the
rechargeable LED work light (e.g.
installation, maintenance, etc.) or
transporting or storing it, take the battery
out of the rechargeable LED work light.
CL 2000 18.0