Maintenance And Care; Disposal Information - Flex DWL 2500 10.8/18.0V Notice D'instruction D'origine

DWL 2500 10.8/18.0V
Assembly
You can set up the LED rechargeable work
lamp in any position with the aid of a support
stand.
You can mount the LED rechargeable work
lamp on a tripod or attach it to any magnetic
surface with the aid of a magnet holder.

Maintenance and care

Cleaning
WARNING!
Before performing any work, pull out
the mains plug.
Do not use water or liquid detergents.
 Remove dirt and dust from the housing
with a paint brush or dry cloth.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Spare parts and accessories
Exploded drawings and spare-part lists
can be found on our homepage:
www.flex-tools.com

Disposal information

WARNING!
Render redundant power tools unusable:
- mains operated power tool by removing
the power cord,
- battery operated power tool by removing
the battery.
EU countries only:
Do not dispose of electric power tools in
the household waste!
In accordance with the European Directive
2012/19/EU on Waste Electrical and
Electronic Equipment and its incorporation
into national law, used power tools must be
collected separately and recycled in an
environmentally friendly manner.
Raw material recovery instead of
waste disposal.
Device, accessories and packaging should be
recycled in an environmentally friendly
manner. Plastic parts are identified for
recycling according to material type.
WARNING!
Do not throw batteries into the household
waste, fire or water. Do not open used
batteries.
15