Environmental Protection; Explanation Of Symbols; Declaration Of Conformity - F.F. Group AG 230/2400S PRO Notice Originale

AG 230/2400S PRO
sity for maintenance operations and will keep your
tool in good working condition. The motor must be
correctly ventilated during tool operation. For this
reason avoid blocking the air inlets.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing as
waste. Machine, accessories and packaging
should be sorted for environment - friendly re-
cycling. The plastic components are labeled for
categorized recycling.

EXPLANATION OF SYMBOLS

Double insulation
For indoor use only. Do not expose to
rain.
• Wear eye protection.
• Damage to lungs if an effective dust
mask is not worn.
• Damage to hearing if effective hearing
protection is not worn.
Wear protective gloves
Do not use chipped, cracked or defective
grinding wheel
To reduce the risk of injury, the user must
read and understand this manual before
using this product.
Important!
Conforms to relevant safety standards
GUARANTEE
This product is warranted in accordance with the
legal/country specific regulations, effective from
the date of purchase by the first user. Damage
attributable to normal wear and tear, overload or
improper handling will be excluded from the guar-
antee. In case of a claim, please send the machine,
completely assembled, to your dealer or the ser-
vice Centre for electric power tools.

DECLARATION OF CONFORMITY

ƒ We declare under our sole responsibility that this
product is in conformity with the following stan-
dards or standardized documents: EN 60745-1, EN
60745-2-3, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3 in accordance with the provisions of
the directives 2006/42/EC, 2014/30/EU.
ƒ Technical File at:
FF GROUP TOOL INDUSTRIES S.A.,
19300, Aspropyrgos - Greece
Loudovikos Tsirigiotis
Operations & Engineering
FF GROUP TOOL INDUSTRIES S.A., 19300
Aspropyrgos - Greece.
English | 9
03/09/20184/5/2018
www.ffgroup-tools.com