Technical Data - BOMANN TSG 7402.1 Mode D'emploi

Problem Possible cause / Action
Cloudiness
Use less detergent if you have soft
glassware
water and select a shortest cycle to
rinse and clean glassware.
Black or
Aluminum utensils have rubbed
grey marks
against dishware. Use a mild abra-
sive cleaner to eliminate those
marks.
Stains on
Only use detergents without color-
inner sur-
ants.
face
White film
Hard water minerals: clean the
on inside
interior by using a damp sponge
surface
with dishwasher detergent. Wear
rubber gloves.
Unsatisfac-
∙ Improper loading ∙ dishes are
tory drying
removed too soon ∙ wrong program
result
has been selected ∙ use of cutlery
with a low-quality coating
Error codes
For some malfunctions, flashing control lamps will
show the following error codes to warn you:
Code Meaning / possible cause
Water inlet fault! Faucet not open, inlet
E1
blocked or water pressure too low.
Malfunction of heating element.
E3
E4 Overflow / water leakage!
Communication error / display malfunc-
Ed
tion!
CAUTION:
 If overflow occurs, turn off the main water sup-
ply before calling an authorized technician.
 If there is water in the lower housing part due to
an overfilling or a small leak, remove this water
before restarting the appliance.
NOTE:
If a problem persists after following the steps
above, please contact your distributor or an au-
thorized technician.
Electrical connection / Water supply....................
Connection voltage: ...............220-240 V~ / 50 Hz
Connection power: .........................730 – 860 W
Water pressure: .............................0.04 – 1 Mpa
Dimension H x W x D / Weight...........................
Unit size: ..........................43.5 x 42.0 x 43.5 cm
Net weight: .......................................ca. 13.5 kg
Available accessory.........................................
Inlet hose safety system: ..........Art.-No. 8900 410
For more information about the product, scan the
QR code on the supplied energy label and/or visit
the official website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifica-
tions during continuous product development re-
mains reserved.
This appliance has been tested according to all
relevant current CE guidelines, such as electro-
magnetic compatibility and low voltage directives,
and has been constructed in accordance with the
latest safety regulations.
77

Technical Data