Samsung HT-F5200 Manuel D'utilisation page 32

Media Play
If there is more than one movie on
the disc or device, select to start a
different title.
1. Select Search Titles, and
Search Titles
then press the E button.
2. Use the ▲▼ buttons to select
a title, and then press the E
button.
Select to play the chapter of your
choice.
Select Search Chapters , and
1.
Search
then press the E button.
Chapters
2. Use the ▲▼ buttons to select
a chapter, and then press the
E button.
Select to play the movie from a
selected time point.
Select Search Time Bar, and
1.
then press the E button.
2. Using the number buttons,
enter the time point you want
to go to, and then press the
Search Time
E button.
Bar
| NOTES |
\
You can also use the ◄►
buttons to advance or rewind
the movie. The movie advances
or rewinds one minute each tme
you press the ◄► buttons.
Select to repeat a title, chapter, or
specific section.
- Off : Select to return to normal
playback.
- Title : Choose to repeat a
selected title.
- Chapter : Choose to repeat a
specific chapter.
Repeat Mode - Repeat A-B : Choose to repeat
a specific section.
1. Press the ▲▼ buttons to
select repeat A-B, and then
press the E button.
Press the E button at the
2.
point where you want repeat
play to start (A). Let the movie
play.
32
|
English
Press the E button at the
3.
point where you want repeat
play to stop (B).
| NOTES |
\
You must set point (B) at least
5 seconds of playing time after
point (A).
Select to set the picture mode.
- Dynamic : Increases sharpness
and brightness.
- Standard : Choose this setting
for most viewing applications.
- Movie : The best setting for
watching movies.
Picture Mode
- User : Lets you adjust the
sharpness and noise reduction
function respectively.
| NOTES |
\
When you use the BD wise
function, this menu will not
appear.
Select to set the desired audio
Audio
language.
In some cases when the product is
connected to a digital TV, the audio
signal may not synchronize with the
Audio Sync
video signal. If this occurs, adjust
the audio delay time to match the
video signal.
Equaliser
Select to use the Equaliser.
Mode
Select to set the Equaliser.
Equaliser
| NOTES |
Settings
\
It only appears when equaliser
mode is on.
Select to set the desired subtitle
language.
- You can also operate this
Subtitle
function by pressing the
SUBTITLE button on the remote
control.
Subtitle Select to set the desired subtitle
Settings options.