ClearSounds CS-CLA7BT Mode D'emploi page 8

NOTE: During charging you cannot use the
Amplified Power Neckloop. The batteries will
have approximately 14 hours of talk time and
200 hours of standby time before needing
recharging. Battery life will depend on actual
usage and amplification levels.
PAIRING YOUR CLA7BT TO
YOUR CELLULAR PHONE.
"Pairing" Creates a link between devices
equipped with Bluetooth wireless technology
and the CLA7BT, and allows the phone to
remember the Neckloop's unique ID; you can
add it to a list of paired devices in the phone.
The CLA7BT should be paired once with the
phone before use. If the pairing information or
log is deleted from your phone, the unit must
be paired again with the phone prior to use.
Once your CLA7BT and phone are paired, your
CLA7BT automatically connects to your phone
if the phone supports that protocol. Some
phones may ask if you want to connect to a
Bluetooth device. You need to check with your
phone's manual on how Bluetooth works with
the phone.
8 – ENGLISH