ClearSounds CS-CLA7BT Mode D'emploi page 13

release the Multi-Function button to confirm
the requested action.
Function Phone
Power ON --
Pairing/ --
Bonding
Power OFF --
Make a ON and the
Voice Dial phone must
Call support
voice dialing
from hands
free device
Device Status
CLA7BT
oFF
oFF
ON (idle)
ON (idle)
13 – ENGLISH
Action
Hands Free Profile
Press and Hold
the Multi-Function
Button until the
Neckloop is powered
ON. A set a 4 tones
plays (low to high)
and LED flashes 2
times (0.1 Sec on,
0.5 Sec off)
Press and Extend
Hold the Multi-
Function Button
until the LED is
steadily ON. The
neckloop can then
be discovered by
another Bluetooth
Device for 2 minutes.
Press and Extend
Hold the Multi-
Function Button
until the neckloop
is powered OFF. A
set of 4 tones plays
(high to low) and the
LED is off.
Press and Release
the Multi-function,
speak the name of
the number you want
dialed, the phone
will dial the number.